You can get an IDE to USB bridge from all the usual sources, but you may find those fail on the older drives in your collection– apparently they require drives using logical block addressing, which ...

To achieve the task of interfacing now-vintage IDE devices with the Raspberry Pi, [Manawyrm] elected to use the single board computer’s GPIO pins to get the job done. 23 pins are required, with 16 ...

I tried cable select and it was a no go. Ide is enabled on the BIOS and controlled by the JMicron controller.<BR><BR>From looking at the devide manager I do see that the IDE/ATAPi controllers:<BR>ATA ...

There is no need for a master or slave distinction with SATA drives because they each connect to the motherboard with their own SATA cable. Two IDE/PATA drives, on the other hand, could share the same ...